
FAQ
Here we have collected the most common questions we receive from our visitors and customers, as well as our answers to these questions. Can’t find what you are looking for? Do not hesitate to contact us at info@smedbo.se.
-
Care and maintenance
Why is the soap sometimes discolored when it comes out of the soap pump?
Discolorations can be caused by the pH value of the soap. Soaps with a high pH value react with the metal and allow the soap to turn brown if the pump has not been used for a while. Use a mild and pH-neutral soap instead.
-
Care and maintenance, OUTLINE LED Mirrors
The mirror arm is beginning to feel loose. Can I tighten it?
The arm of our LED mirrors can be tightened. There is a small mark in the joint, place, for example, a coin in the mark and tighten
-
Assembly
How do I assemble the clothes line FK480?
Click here to see the installation instructions on the product page for FK480.
-
OUTLINE LED Mirrors
Can I cut the cord on one of the LED mirrors for direct hardwire connection into the wall?
For direct mounting into the wall, we recommend that you choose our mirror FK486H or FK487H which is prepared for this. Or, if you want a mirror without cord, take a looka t our range of battery mirrors in nice design. Direct installation must always be carried out by a specialist. Mirrors with cord are […]
-
OUTLINE LED Mirrors
How long is the cord on a LED mirror?
The extended length is about 170. In normal position 80 cm.
-
Care and maintenance
How to clean a product?
Clean with a soft cloth and luke warm water, or a mild soapy solution. Do not polish.
-
Assembly
Can I put up the clothes line FK480 in my sauna?
No, FK480 should not be installed in sauna rooms as it contains plastic parts that can be damaged by high heat.
-
Assembly
What type of charger should I use to charge a rechargeable mirror?
A rechargeable mirror is charged via a standard mobile charger with an input of 5V 1A.
-
DRY Towel Warmers
Why doesn’t my towel warmer with timer work?
Our towel warmers with timer have an overheating protection. If too many towels are hung on the warmer, the overheating protection is activated and the towel warmer switches off to avoid overheating. Turn off the towel warmer, lift off some towels and let the towel warmer “rest” for about 15 minutes. When the towel warmer […]
-
DRY Towel Warmers
On the towel warmers, the on/off button is placed at the bottom right, can I get the on/off button on the left instead?
Unfortunately not. However, you can turn some of our towel rails upside down so that the on/off button ends up at the top left. Remember to mount the towel rail at the appropriate height, so that you can reach the on/off button. NOTE! This only works on towel rails with item no. FK700, FB700, FK701 […]
-
Assembly
Is it possible to turn a toilet paper holder so that it hangs on the left?
No, unfortunately, the design is hung on the right, but on the other hand, Beslagsboden’s self-adhesive toilet paper holder can be turned both right and left.
-
Care and maintenance
What should I do if the pump head on the soap pump is stuck and it is not possible to pump?
This is usually because soap residues have dried inside the pump. Rinse the pump with warm water when changing the soap and the pump mechanism will last longer.